5 Best DI Boxes For Bass in 2020

Because they can be a recording requirement, we're checking out some direct injection alternatives to fix your impedance problems, so join us as we explore the 5 best bass DI boxes in 2020.

Now you're going to notice that we've decided to focus on the Behringer range and there's a good reason for that because bass DI boxes need to be able to match impedance without losing the integrity of the signal that isn't managed by all DI boxes.

Generally speaking, the signal loss is often in the low end that is out of the question for bass and while there are other choices on the market we believed we would hone in on what distinguishes some of Behringer's boxes and included a distinct brand for excellent comparative measurement.

View The Best DI Box For Bass Below

1. Behringer Ultra-DI DI400P

Behringer Ultra-DI DI400P 2020

First off we have a Behringer passive DI box featuring top-notch German engineering with a proprietaryOT-2 transformer.

The transformer is tuned to a flat frequency allowing more signal fidelity to be delivered. It provides extremely efficient signal isolation and is equipped with a ground-lift switch to guarantee a clear and direct signal is maintained free of hum.

In a very heavy-duty situation with a compact size, the superior electronics are stashed. It has an easy-to-use design and features gold-plated, 1/4 "jacks for in and out with a brilliantly balanced XLR send. It can handle energy ratings of up to three thousand watts.

Pros:

+ Renowned transformer BehringerOT-2.
+ The situation is rough.
+ Handling of 3,000 watts.

Why we liked it - for such a fair retail cost it is truly quiet and high-quality, it matches impedance with a T and offers a clever alternative.


2. Behringer V-Tone Bass Driver

Behringer V-Tone Bass Driver

This next choice is fairly much a 2 for 1 as it's a excellent preamp with some fantastic vintage tones on board as well as an embedded DI that suits your production desk's impedance.

The tube emulation is quite impressive and provides bass players a variety of sounds that are fat and authentically modeled with. It features DRIVE, TREBLE, BASS, LEVEL, and PRESENCE dials all specifically tuned for bass adjustment and finding your required tone. The mix control enables users to send immediate bass effects.

The emulation can be totally bypassed with a switch despite its dual nature, making it a specialized direct injection box.

It also features the OT-2 transistor businesses and a ground-switch to ensure that the initial input remains unchanged and true to your signals.

It has a rough accommodation and links to the production of gold plated TRS and XLR harbors.

Pros:

+ Preservation of the high fidelity signal.
+ Emulator tube.
+ Available I / O.

Why We Liked It - It's an innovative blend that provides users a DI box that doubles as a preamp effect.

3. Premium Direct Injection Audio Box

Premium Direct Injection Audio Box 2020

Premium Direct Injection Audio Box PDC21 from Pyle was included in our listing because it also features a flat-tunedOT-2 custom transformer to provide the same zero-um ground lift as the Behringers we showed.

It also has a parallel TRS I / O that enables monitoring from your amp while sending the smooth signal to the mixing desk or P.A.

It has a manual switch to attenuate the decibels and a detachable AC power cord that implies it can be used to record live noise.

Pros:

+ Tuned flat.
+ Fabricated well.
+ Accessible.

Why We Liked It - It is a cost-effective alternative that is sufficiently feasible and very versatile, although not solely for bass guitars.

4. Behringer Ultra-DI DI20

 Behringer Ultra-DI DI20 review 2020

 Ultra-DI DI20 Option number four is a multi-channel option that allows 2 individual channels to be connected and sent to a load. For those who like to chop and alter tools during a set, each work separately making it a great option.


It's basically a split-signal box coming from the DI box that depends again on a superb flat-tuned transformer. It can run through a phantom power of 9-volt battery or48-volt.

For those who use stereo instruments like a keyboard, it is a excellent choice, but as mentioned, it will be perfect for running two plugged instruments and ready to play this is cool if you fancy having 2 distinct set-ups of effects.

It operates in mono and stereo or can be fed from a single mono signal to two distinct amps.

Pros:

+ Signals split.
+ Tuned flat.
+ Available I / O.

Why We Liked It-Despite targeting a variety of tools, it has excellent loyalty and provides some exciting live and studio apps.

5. Behringer Ultra-G GI100 Professional

Behringer Ultra-G GI100 Professional review 2020

 Behringer Ultra-G GI100 Professional Finally, from the Behringer collection, we have the ultra-G GI100 model that serves as a more professional solution. It is an active DI box that harbors advanced routing capacities and has a few more bells and whistles than the designs of Ultra DI.


It has the all-important ground-lift switch and flat-tuned 0T-2 transformer to maintain the lines clear and compensate for a signal loss, but it also has buttons to attenuate decibel levels and a 4x12 inch taxi simulator built-in bonus that acts as a gain boost.

Amp technician Jurgen Rath and sounds fab intended the simulator. It is very roughly located and fits on a rack compactly.

Pros:

+ Construction of heavy duty.
+ Attenuator attenuator.
Emulator of the amp.

Why We Liked It - It's an impressive kit piece with an attractive price tag for its capacities, making it a good value for cash.

 

Bass DI Boxes Buyers Guide 2020

What's a DI Box for Bass?


A bass DI box is an significant small piece of kit that enables users to connect high-output impedance instruments and send signals via reduced impedance links, typically from TRS / TS to XLR, usually reserved for microphones.

DI stands for Direct Injection, some contend that it is effectively Direct Interface that is a suitable description as it acts from your tool to your mixer as a go-between device.

In addition to matching the impedance, they also retain ground isolation between the input signal and the output, eliminating line noise, which helps to determine which electrical signal the bass guitar sends first.

Having a pristine signal implies that the sound can be performed with the other end, making mixing a much simpler job for the man behind the console in a professional studio.

In an amateur recording scenario, this is particularly helpful as a good DI box can save you the difficulty of pro-level sound-proofing or purchasing very costly cords and having carefully isolated mains electronics.

In fact, an alternating current provides off a lot of residual noise that can influence recording, which becomes very difficult if you amplify it or add impacts as you multiply the dirty signal fundamentally.

Broadcasting radio frequencies can also be a nuisance to electronic instruments and interfere with your signal that can be taken care of again by the ground-lift.

While they are commonly used for high-quality recordings in studio apps, they may also be required for stage use, particularly if the electrical is older or you have comprehensive cable runs.

There are two kinds of DI boxes, and like most electronics, this boils down to active and passive, and what you need to get is quite essential and depends on your bass circuit.

Active DI boxes

An active DI includes a preamp that boosts the profit of your tools a little before sending the signal.

They are ideal for instruments with active electronics and, as the circuitry is powered, some have advanced capabilities and can handle more complex signal routing.

They usually run on a battery and give your bass a higher headroom, some rely on phantom power from the desk or mains themselves and others have their own power supplies or adapters.

Passive DI boxes

Passive DI boxes do a better job of sticking to the initial input because no juice is added.

The earliest DI box designs were all of a passive pass-through nature that transformers are used to transform the signals and are the most common choice among most musicians because of their impeccable fidelity.

Do I Need a DI Box for Bass?


They are the distinction between an amateur and pro bassist in this day and age, and while most studios are likely to have their own, without one, you can not compensate for the electronics of a shoddy gig venue or budget guitars and wires.

They improve your signal by grounding and balancing the line-level noise for you (ground-lift) and enabling you to send elevated performance without any loss of quantity or signal.

Some boxes have a throughput, often shortened to thru, enabling you to use your on-stage amp solely for ace-like, near surveillance reasons.

Whether you want to record your bass at home or just prevent loss due to lengthy wires, the game-changer will be a DI box for your bass.

Conclusion

Like the remainder of the group, they enable you to directly plug into a low-impedance channel without sacrificing the beefy sound you're enthusiastic about.

There are several on the market and while we have only highlighted a couple of them, we hope that together with our buyer's guide they will have served as food for thought.

 

Expert Tip

It is important to keep in mind that a DI box and a preamp DI box are two very different pieces of kit that you need to be sure of what you need, so be sure to consider your intended use.

Did you Know

First, DI boxes were created to address the problems that first emerged with the development of the contemporary electro-dynamic guitar pickup that was difficult for delicate electronics in the studio.